Feed Finger and Feed Tube Removal

1. Ensure that the collet is closed. 

2. Pull the pin and roller out of the channel of the chuck and feed cam drum to enable free movement of the feed lever. 

3. Move the feed lever to its most forward position.

4. Open the collet.

5. Pull the feed lever to its fully back position to pull the bar out of the collet.

6. Pull the feed slide guide latch out of the way to allow the roller of the bronze feed slide to pass to the left side of the pin.

7. The feed tube assembly should be free to pull out. Do not let the bronze feed slide fall while removing.

8. To remove the stock from the feed tube assembly, use the stock reel as a counter force to get the stock free of the feed fingers.

9. Use the feed tube block and clamp to assist in unscrewing the feed finger from the feed tube.