Feed Finger and Feed Tube Installation

Creation date: 9/13/2024 11:10 AM    Updated: 9/13/2024 11:10 AM

1. Using the feed tube block in a clamp attach the feed finger to the feed tube. 

2. Insert the feed tube and feed finger assembly into the spindle. Place bronze feed slide onto the feed tube with the roller facing outward while inserting the assembly. Line up the keyway of the feed tube while trying to insert the assembly.

3. Pull the pin and roller out of the channel of the chuck and feed cam drum to enable free movement of the feed lever.

4. Pull the feed slide guide latch out of the way to allow the roller of the bronze feed slide to pass to the right side of the pin.

5. Replace the roller into the chuck and feed cam drum.